Re: [atomic-devel] Packages added/removed from F25AH -> F26AH

[Daniel Walsh <dwalsh redhat com>]

On 06/05/2017 11:37 AM, Dusty Mabe wrote:
> Please reply-all when responding to this mail.
>
> I've been doing some F25->F26 exploration and notice there are quite a
> few packages added and removed between F25 and F26. Let's go through
> these and make sure each addition/removal makes sense.
>
> You can mostly ignore the "Upgraded" section. Feel free to look at those
> too to see if there is anything that looks odd.
>
>
> ```
> Upgraded:
>    GeoIP 1.6.10-1.fc25 -> 1.6.11-1.fc26
>    GeoIP-GeoLite-data 2017.04-1.fc25 -> 2017.05-1.fc26
>    NetworkManager 1:1.4.4-5.fc25 -> 1:1.8.0-3.fc26
>    NetworkManager-libnm 1:1.4.4-5.fc25 -> 1:1.8.0-3.fc26
>    NetworkManager-team 1:1.4.4-5.fc25 -> 1:1.8.0-3.fc26
>    acl 2.2.52-12.fc25 -> 2.2.52-14.fc26
>    atomic 1.17.2-1.fc25 -> 1.18.1-2.fc26
>    atomic-devmode 0.3.6-1.fc25 -> 0.3.7-1.fc26
>    attr 2.4.47-16.fc24 -> 2.4.47-18.fc26
>    audit 2.7.6-1.fc25 -> 2.7.6-1.fc26
>    audit-libs 2.7.6-1.fc25 -> 2.7.6-1.fc26
>    audit-libs-python 2.7.6-1.fc25 -> 2.7.6-1.fc26
>    audit-libs-python3 2.7.6-1.fc25 -> 2.7.6-1.fc26
>    authconfig 6.2.10-14.fc25 -> 7.0.1-1.fc26
>    basesystem 11-2.fc24 -> 11-3.fc26
>    bash 4.3.43-4.fc25 -> 4.4.12-5.fc26
>    bash-completion 1:2.5-1.fc25 -> 1:2.5-2.fc26
>    bind99-libs 9.9.9-4.P8.fc25 -> 9.9.9-5.P8.fc26
>    bind99-license 9.9.9-4.P8.fc25 -> 9.9.9-5.P8.fc26
>    boost-iostreams 1.60.0-10.fc25 -> 1.63.0-5.fc26
>    boost-program-options 1.60.0-10.fc25 -> 1.63.0-5.fc26
>    boost-random 1.60.0-10.fc25 -> 1.63.0-5.fc26
>    boost-regex 1.60.0-10.fc25 -> 1.63.0-5.fc26
>    boost-system 1.60.0-10.fc25 -> 1.63.0-5.fc26
>    boost-thread 1.60.0-10.fc25 -> 1.63.0-5.fc26
>    bridge-utils 1.5-13.fc24 -> 1.5-14.fc26
>    btrfs-progs 4.6.1-1.fc25 -> 4.9.1-2.fc26
>    bubblewrap 0.1.8-1.fc25 -> 0.1.8-1.fc26
>    bzip2 1.0.6-21.fc25 -> 1.0.6-22.fc26
>    bzip2-libs 1.0.6-21.fc25 -> 1.0.6-22.fc26
>    ca-certificates 2017.2.14-1.0.fc25 -> 2017.2.14-1.0.fc26
>    ceph-common 1:10.2.4-2.fc25 -> 1:10.2.7-2.fc26
>    checkpolicy 2.5-8.fc25 -> 2.6-1.fc26
>    chkconfig 1.8-1.fc25 -> 1.10-1.fc26
>    chrony 2.4.1-1.fc25 -> 3.1-4.fc26
>    cloud-init 0.7.9-4.fc25 -> 0.7.9-5.fc26
>    cloud-utils-growpart 0.27-16.fc25 -> 0.27-17.fc26
>    cockpit-bridge 137-1.fc25 -> 141-1.fc26
>    cockpit-docker 137-1.fc25 -> 141-1.fc26
>    cockpit-networkmanager 137-1.fc25 -> 141-1.fc26
>    cockpit-ostree 137-1.fc25 -> 141-1.fc26
>    cockpit-system 137-1.fc25 -> 141-1.fc26
>    conntrack-tools 1.4.3-1.fc25 -> 1.4.4-3.fc26
>    container-selinux 2:2.14-1.fc25 -> 2:2.16-1.fc26
>    coreutils 8.25-17.fc25 -> 8.27-5.fc26
>    coreutils-common 8.25-17.fc25 -> 8.27-5.fc26
>    cpio 2.12-3.fc24 -> 2.12-4.fc26
>    cracklib 2.9.6-4.fc25 -> 2.9.6-5.fc26
>    cracklib-dicts 2.9.6-4.fc25 -> 2.9.6-5.fc26
>    criu 2.12-1.fc25 -> 3.0-1.fc26
>    crypto-policies 20160921-4.gitf3018dd.fc25 -> 20170531-1.gitce0df7b.fc26
>    cryptsetup 1.7.5-1.fc25 -> 1.7.5-1.fc26
>    cryptsetup-libs 1.7.5-1.fc25 -> 1.7.5-1.fc26
>    curl 7.51.0-6.fc25 -> 7.53.1-7.fc26
>    cyrus-sasl-lib 2.1.26-26.2.fc24 -> 2.1.26-32.fc26
>    dbus 1:1.11.12-1.fc25 -> 1:1.11.12-1.fc26
>    dbus-glib 0.108-1.fc25 -> 0.108-2.fc26
>    dbus-libs 1:1.11.12-1.fc25 -> 1:1.11.12-1.fc26
>    device-mapper 1.02.136-3.fc25 -> 1.02.137-6.fc26
>    device-mapper-event 1.02.136-3.fc25 -> 1.02.137-6.fc26
>    device-mapper-event-libs 1.02.136-3.fc25 -> 1.02.137-6.fc26
>    device-mapper-libs 1.02.136-3.fc25 -> 1.02.137-6.fc26
>    device-mapper-persistent-data 0.6.3-1.fc25 -> 0.6.3-5.fc26
>    dhcp-client 12:4.3.5-2.fc25 -> 12:4.3.5-6.fc26
>    dhcp-common 12:4.3.5-2.fc25 -> 12:4.3.5-6.fc26
>    dhcp-libs 12:4.3.5-2.fc25 -> 12:4.3.5-6.fc26
>    diffutils 3.3-13.fc24 -> 3.5-3.fc26
>    dnsmasq 2.76-2.fc25 -> 2.76-3.fc26
>    docker 2:1.12.6-6.gitae7d637.fc25 -> 2:1.13.1-13.git51eb16e.fc26
>    docker-common 2:1.12.6-6.gitae7d637.fc25 -> 2:1.13.1-13.git51eb16e.fc26
>    dracut 044-78.fc25 -> 044-181.fc26
>    dracut-config-generic 044-78.fc25 -> 044-181.fc26
>    dracut-network 044-78.fc25 -> 044-181.fc26
>    e2fsprogs 1.43.3-1.fc25 -> 1.43.4-2.fc26
>    e2fsprogs-libs 1.43.3-1.fc25 -> 1.43.4-2.fc26
>    efibootmgr 14-3.fc25 -> 14-3.fc26
>    efivar-libs 30-4.fc25 -> 30-4.fc26
>    elfutils-default-yama-scope 0.169-1.fc25 -> 0.169-1.fc26
>    elfutils-libelf 0.169-1.fc25 -> 0.169-1.fc26
>    elfutils-libs 0.169-1.fc25 -> 0.169-1.fc26
>    emacs-filesystem 1:25.2-2.fc25 -> 1:25.2-2.fc26
>    etcd 3.1.3-1.fc25 -> 3.1.3-1.fc26
>    expat 2.2.0-1.fc25 -> 2.2.0-2.fc26
>    fcgi 2.4.0-29.fc24 -> 2.4.0-30.fc26
>    fedora-logos 22.0.0-3.fc24 -> 26.0.1-1.fc26
>    fedora-release 25-2 -> 26-0.7
>    fedora-release-atomichost 25-2 -> 26-0.7
>    fedora-repos 25-4 -> 26-0.9
>    file 5.29-4.fc25 -> 5.30-6.fc26
>    file-libs 5.29-4.fc25 -> 5.30-6.fc26
>    filesystem 3.2-37.fc24 -> 3.2-40.fc26
>    findutils 1:4.6.0-8.fc25 -> 1:4.6.0-12.fc26
>    fipscheck 1.4.1-11.fc25 -> 1.5.0-1.fc26
>    fipscheck-lib 1.4.1-11.fc25 -> 1.5.0-1.fc26
>    flannel 0.7.0-2.fc25 -> 0.7.0-3.fc26
>    freetype 2.6.5-9.fc25 -> 2.7.1-9.fc26
>    fuse 2.9.7-1.fc25 -> 2.9.7-2.fc26
>    fuse-libs 2.9.7-1.fc25 -> 2.9.7-2.fc26
>    gawk 4.1.3-8.fc25 -> 4.1.4-3.fc26
>    gc 7.4.4-1.fc25 -> 7.6.0-2.fc26
>    gdbm 1.13-1.fc25 -> 1.13-1.fc26
>    gettext 0.19.8.1-3.fc25 -> 0.19.8.1-9.fc26
>    gettext-libs 0.19.8.1-3.fc25 -> 0.19.8.1-9.fc26
>    glib-networking 2.50.0-1.fc25 -> 2.50.0-2.fc26
>    glib2 2.50.3-1.fc25 -> 2.52.2-2.fc26
>    glibc 2.24-4.fc25 -> 2.25-4.fc26
>    glibc-all-langpacks 2.24-4.fc25 -> 2.25-4.fc26
>    glibc-common 2.24-4.fc25 -> 2.25-4.fc26
>    glusterfs 3.10.2-1.fc25 -> 3.10.3-1.fc26
>    glusterfs-client-xlators 3.10.2-1.fc25 -> 3.10.3-1.fc26
>    glusterfs-fuse 3.10.2-1.fc25 -> 3.10.3-1.fc26
>    glusterfs-libs 3.10.2-1.fc25 -> 3.10.3-1.fc26
>    gmp 1:6.1.1-1.fc25 -> 1:6.1.2-4.fc26
>    gnupg 1.4.21-1.fc25 -> 1.4.21-2.fc26
>    gnupg2 2.1.13-2.fc25 -> 2.1.21-2.fc26
>    gnupg2-smime 2.1.13-2.fc25 -> 2.1.21-2.fc26
>    gnutls 3.5.12-2.fc25 -> 3.5.12-2.fc26
>    gobject-introspection 1.50.0-1.fc25 -> 1.52.1-1.fc26
>    gomtree 0.3.1-1.fc25 -> 0.3.1-2.fc26
>    gperftools-libs 2.5-2.fc25 -> 2.5.93-1.fc26
>    gpgme 1.8.0-10.fc25 -> 1.8.0-12.fc26
>    grep 2.27-2.fc25 -> 3.0-1.fc26
>    grub2 1:2.02-0.38.fc25 -> 1:2.02-0.38.fc26
>    grub2-efi 1:2.02-0.38.fc25 -> 1:2.02-0.38.fc26
>    grub2-tools 1:2.02-0.38.fc25 -> 1:2.02-0.38.fc26
>    grubby 8.40-3.fc24 -> 8.40-4.fc26
>    gsettings-desktop-schemas 3.22.0-1.fc25 -> 3.24.0-1.fc26
>    gssproxy 0.7.0-9.fc25 -> 0.7.0-9.fc26
>    guile 5:2.0.13-1.fc25 -> 5:2.0.14-1.fc26
>    gzip 1.8-1.fc25 -> 1.8-2.fc26
>    hardlink 1:1.1-1.fc25 -> 1:1.3-1.fc26
>    hostname 3.15-7.fc24 -> 3.18-2.fc26
>    info 6.1-4.fc25 -> 6.3-3.fc26
>    initscripts 9.69-1.fc25 -> 9.72-1.fc26
>    ipcalc 0.1.8-1.fc25 -> 0.2.0-1.fc26
>    iproute 4.10.0-1.fc25 -> 4.11.0-1.fc26
>    iproute-tc 4.10.0-1.fc25 -> 4.11.0-1.fc26
>    iptables 1.6.0-3.fc25 -> 1.6.1-2.fc26
>    iptables-libs 1.6.0-3.fc25 -> 1.6.1-2.fc26
>    iptables-services 1.6.0-3.fc25 -> 1.6.1-2.fc26
>    iputils 20161105-1.fc25 -> 20161105-2.fc26
>    iscsi-initiator-utils 6.2.0.873-34.git4c1f2d9.fc25 -> 6.2.0.874-3.git86e8892.fc26
>    iscsi-initiator-utils-iscsiuio 6.2.0.873-34.git4c1f2d9.fc25 -> 6.2.0.874-3.git86e8892.fc26
>    jansson 2.9-1.fc25 -> 2.10-1.fc26
>    json-glib 1.2.6-1.fc25 -> 1.2.8-1.fc26
>    kernel 4.11.3-200.fc25 -> 4.11.3-300.fc26
>    kernel-core 4.11.3-200.fc25 -> 4.11.3-300.fc26
>    kernel-modules 4.11.3-200.fc25 -> 4.11.3-300.fc26
>    keyutils 1.5.9-8.fc24 -> 1.5.10-1.fc26
>    keyutils-libs 1.5.9-8.fc24 -> 1.5.10-1.fc26
>    kmod 23-1.fc25 -> 24-1.fc26
>    kmod-libs 23-1.fc25 -> 24-1.fc26
>    kpartx 0.4.9-83.fc25 -> 0.4.9-87.fc26
>    krb5-libs 1.14.4-7.fc25 -> 1.15.1-8.fc26
>    kubernetes 1.5.3-1.fc25 -> 1.6.1-1.fc26
>    kubernetes-client 1.5.3-1.fc25 -> 1.6.1-1.fc26
>    kubernetes-master 1.5.3-1.fc25 -> 1.6.1-1.fc26
>    kubernetes-node 1.5.3-1.fc25 -> 1.6.1-1.fc26
>    less 481-7.fc25 -> 487-3.fc26
>    libacl 2.2.52-12.fc25 -> 2.2.52-14.fc26
>    libaio 0.3.110-6.fc24 -> 0.3.110-7.fc26
>    libarchive 3.2.2-2.fc25 -> 3.2.2-4.fc26
>    libassuan 2.4.3-1.fc25 -> 2.4.3-2.fc26
>    libatomic_ops 7.4.4-1.fc25 -> 7.4.4-2.fc26
>    libattr 2.4.47-16.fc24 -> 2.4.47-18.fc26
>    libbabeltrace 1.4.0-3.fc25 -> 1.5.2-2.fc26
>    libbasicobjects 0.1.1-29.fc25 -> 0.1.1-30.fc26
>    libblkid 2.28.2-2.fc25 -> 2.29.1-2.fc26
>    libcap 2.25-2.fc25 -> 2.25-5.fc26
>    libcap-ng 0.7.8-1.fc25 -> 0.7.8-3.fc26
>    libcephfs1 1:10.2.4-2.fc25 -> 1:10.2.7-2.fc26
>    libcgroup 0.41-9.fc25 -> 0.41-11.fc26
>    libcollection 0.7.0-29.fc25 -> 0.7.0-30.fc26
>    libcom_err 1.43.3-1.fc25 -> 1.43.4-2.fc26
>    libcroco 0.6.11-3.fc25 -> 0.6.12-1.fc26
>    libcrypt-nss 2.24-4.fc25 -> 2.25-4.fc26
>    libcurl 7.51.0-6.fc25 -> 7.53.1-7.fc26
>    libdaemon 0.14-10.fc24 -> 0.14-11.fc26
>    libdb 5.3.28-16.fc25 -> 5.3.28-21.fc26
>    libdb-utils 5.3.28-16.fc25 -> 5.3.28-21.fc26
>    libedit 3.1-16.20160618cvs.fc25 -> 3.1-17.20160618cvs.fc26
>    libev 4.24-1.fc25 -> 4.24-2.fc26
>    libevent 2.0.22-1.fc25 -> 2.0.22-3.fc26
>    libfdisk 2.28.2-2.fc25 -> 2.29.1-2.fc26
>    libffi 3.1-9.fc24 -> 3.1-10.fc26
>    libgcc 6.3.1-1.fc25 -> 7.1.1-2.fc26
>    libgcrypt 1.6.6-1.fc25 -> 1.7.6-2.fc26
>    libgomp 6.3.1-1.fc25 -> 7.1.1-2.fc26
>    libgpg-error 1.24-1.fc25 -> 1.25-2.fc26
>    libicu 57.1-5.fc25 -> 57.1-6.fc26
>    libidn 1.33-1.fc25 -> 1.33-2.fc26
>    libidn2 2.0.2-1.fc25 -> 2.0.2-1.fc26
>    libini_config 1.3.0-29.fc25 -> 1.3.0-30.fc26
>    libksba 1.3.5-1.fc25 -> 1.3.5-3.fc26
>    libmetalink 0.1.3-1.fc25 -> 0.1.3-2.fc26
>    libmnl 1.0.4-1.fc25 -> 1.0.4-2.fc26
>    libmodman 2.0.1-12.fc24 -> 2.0.1-13.fc26
>    libmount 2.28.2-2.fc25 -> 2.29.1-2.fc26
>    libndp 1.6-1.fc25 -> 1.6-2.fc26
>    libnet 1.1.6-11.fc24 -> 1.1.6-12.fc26
>    libnetfilter_conntrack 1.0.6-2.fc25 -> 1.0.6-2.fc26
>    libnetfilter_cthelper 1.0.0-9.fc24 -> 1.0.0-10.fc26
>    libnetfilter_cttimeout 1.0.0-7.fc24 -> 1.0.0-8.fc26
>    libnetfilter_queue 1.0.2-7.fc24 -> 1.0.2-8.fc26
>    libnfnetlink 1.0.1-8.fc24 -> 1.0.1-9.fc26
>    libnfsidmap 0.27-1.fc25 -> 0.27-1.fc26
>    libnghttp2 1.13.0-2.fc25 -> 1.21.1-1.fc26
>    libnl3 3.2.29-3.fc25 -> 3.3.0-1.fc26
>    libnl3-cli 3.2.29-3.fc25 -> 3.3.0-1.fc26
>    libpath_utils 0.2.1-29.fc25 -> 0.2.1-30.fc26
>    libpcap 14:1.7.4-2.fc24 -> 14:1.8.1-3.fc26
>    libpng 2:1.6.27-1.fc25 -> 2:1.6.28-2.fc26
>    libproxy 0.4.14-1.fc25 -> 0.4.15-1.fc26
>    libpsl 0.17.0-1.fc25 -> 0.17.0-2.fc26
>    libpwquality 1.3.0-6.fc25 -> 1.3.0-8.fc26
>    librados2 1:10.2.4-2.fc25 -> 1:10.2.7-2.fc26
>    libradosstriper1 1:10.2.4-2.fc25 -> 1:10.2.7-2.fc26
>    librbd1 1:10.2.4-2.fc25 -> 1:10.2.7-2.fc26
>    libref_array 0.1.5-29.fc25 -> 0.1.5-30.fc26
>    librepo 1.7.18-3.fc25 -> 1.7.20-3.fc26
>    libreport-filesystem 2.8.0-1.fc25 -> 2.9.1-2.fc26
>    librgw2 1:10.2.4-2.fc25 -> 1:10.2.7-2.fc26
>    libseccomp 2.3.2-1.fc25 -> 2.3.2-1.fc26
>    libsecret 0.18.5-2.fc25 -> 0.18.5-3.fc26
>    libselinux 2.5-13.fc25 -> 2.6-6.fc26
>    libselinux-python 2.5-13.fc25 -> 2.6-6.fc26
>    libselinux-python3 2.5-13.fc25 -> 2.6-6.fc26
>    libselinux-utils 2.5-13.fc25 -> 2.6-6.fc26
>    libsemanage 2.5-9.fc25 -> 2.6-4.fc26
>    libsemanage-python 2.5-9.fc25 -> 2.6-4.fc26
>    libsemanage-python3 2.5-9.fc25 -> 2.6-4.fc26
>    libsepol 2.5-10.fc25 -> 2.6-1.fc26
>    libsigsegv 2.10-10.fc24 -> 2.11-1.fc26
>    libsmartcols 2.28.2-2.fc25 -> 2.29.1-2.fc26
>    libsolv 0.6.27-2.fc25 -> 0.6.27-2.fc26
>    libsoup 2.56.0-2.fc25 -> 2.58.1-1.fc26
>    libss 1.43.3-1.fc25 -> 1.43.4-2.fc26
>    libssh2 1.8.0-1.fc25 -> 1.8.0-2.fc26
>    libsss_idmap 1.15.2-3.fc25 -> 1.15.2-5.fc26
>    libsss_nss_idmap 1.15.2-3.fc25 -> 1.15.2-5.fc26
>    libsss_sudo 1.15.2-3.fc25 -> 1.15.2-5.fc26
>    libstdc++ 6.3.1-1.fc25 -> 7.1.1-2.fc26
>    libtasn1 4.10-1.fc25 -> 4.12-1.fc26
>    libteam 1.26-1.fc25 -> 1.26-2.fc26
>    libtirpc 1.0.1-4.rc3.fc25 -> 1.0.1-4.rc3.fc26
>    libtomcrypt 1.17-29.fc25 -> 1.17-30.fc26
>    libtommath 1.0-4.fc24 -> 1.0-5.fc26
>    libtool-ltdl 2.4.6-13.fc25 -> 2.4.6-17.fc26
>    libunistring 0.9.4-3.fc24 -> 0.9.7-1.fc26
>    libunwind 1.1-11.fc24 -> 1.2-1.fc26
>    libusb 1:0.1.5-7.fc24 -> 1:0.1.5-8.fc26
>    libusbx 1.0.21-1.fc25 -> 1.0.21-2.fc26
>    libuser 0.62-4.fc25 -> 0.62-6.fc26
>    libutempter 1.1.6-8.fc24 -> 1.1.6-9.fc26
>    libuuid 2.28.2-2.fc25 -> 2.29.1-2.fc26
>    libverto 0.2.6-6.fc24 -> 0.2.6-7.fc26
>    libverto-libev 0.2.6-6.fc24 -> 0.2.6-7.fc26
>    libxkbcommon 0.7.1-1.fc25 -> 0.7.1-3.fc26
>    libxml2 2.9.4-2.fc25 -> 2.9.4-2.fc26
>    libyaml 0.1.6-8.fc24 -> 0.1.7-2.fc26
>    linux-atm-libs 2.5.1-14.fc24 -> 2.5.1-16.fc26
>    linux-firmware 20170313-72.git695f2d6d.fc25 -> 20170313-72.git695f2d6d.fc26
>    lsof 4.89-4.fc25 -> 4.89-5.fc26
>    lttng-ust 2.8.1-2.fc25 -> 2.9.0-2.fc26
>    lua-libs 5.3.4-3.fc25 -> 5.3.4-3.fc26
>    lvm2 2.02.167-3.fc25 -> 2.02.168-6.fc26
>    lvm2-libs 2.02.167-3.fc25 -> 2.02.168-6.fc26
>    lzo 2.08-8.fc24 -> 2.08-9.fc26
>    make 1:4.1-6.fc25 -> 1:4.2.1-2.fc26
>    mdadm 3.4-2.fc25 -> 4.0-1.fc26
>    mokutil 1:0.3.0-3.fc25 -> 1:0.3.0-4.fc26
>    mozjs17 17.0.0-16.fc25 -> 17.0.0-16.fc26
>    mpfr 3.1.5-1.fc25 -> 3.1.5-3.fc26
>    ncurses 6.0-6.20160709.fc25 -> 6.0-8.20170212.fc26
>    ncurses-base 6.0-6.20160709.fc25 -> 6.0-8.20170212.fc26
>    ncurses-libs 6.0-6.20160709.fc25 -> 6.0-8.20170212.fc26
>    net-tools 2.0-0.40.20160329git.fc25 -> 2.0-0.42.20160912git.fc26
>    nettle 3.3-1.fc25 -> 3.3-2.fc26
>    nfs-utils 1:2.1.1-5.rc2.fc25 -> 1:2.1.1-5.rc3.fc26
>    nmap-ncat 2:7.40-1.fc25 -> 2:7.40-2.fc26
>    npth 1.3-1.fc25 -> 1.3-2.fc26
>    nspr 4.14.0-2.fc25 -> 4.14.0-2.fc26
>    nss 3.30.2-1.1.fc25 -> 3.30.2-1.1.fc26
>    nss-altfiles 2.18.1-7.fc24 -> 2.18.1-8.fc26
>    nss-pem 1.0.3-3.fc25 -> 1.0.3-3.fc26
>    nss-softokn 3.30.2-1.0.fc25 -> 3.30.2-1.0.fc26
>    nss-softokn-freebl 3.30.2-1.0.fc25 -> 3.30.2-1.0.fc26
>    nss-sysinit 3.30.2-1.1.fc25 -> 3.30.2-1.1.fc26
>    nss-tools 3.30.2-1.1.fc25 -> 3.30.2-1.1.fc26
>    nss-util 3.30.2-1.0.fc25 -> 3.30.2-1.0.fc26
>    oci-register-machine 0-3.7.gitbb20b00.fc25 -> 0-3.7.gitbb20b00.fc26
>    oci-systemd-hook 1:0.1.7-1.git1788cf2.fc25 -> 1:0.1.7-1.git1788cf2.fc26
>    oddjob 0.34.3-2.fc24 -> 0.34.4-1.fc26
>    oddjob-mkhomedir 0.34.3-2.fc24 -> 0.34.4-1.fc26
>    openldap 2.4.44-10.fc25 -> 2.4.44-10.fc26
>    openssh 7.4p1-4.fc25 -> 7.5p1-2.fc26
>    openssh-clients 7.4p1-4.fc25 -> 7.5p1-2.fc26
>    openssh-server 7.4p1-4.fc25 -> 7.5p1-2.fc26
>    openssl 1:1.0.2k-1.fc25 -> 1:1.1.0e-1.fc26
>    openssl-libs 1:1.0.2k-1.fc25 -> 1:1.1.0e-1.fc26
>    os-prober 1.74-1.fc25 -> 1.74-1.fc26
>    ostree 2017.6-2.fc25 -> 2017.6-2.fc26
>    ostree-grub2 2017.6-2.fc25 -> 2017.6-2.fc26
>    ostree-libs 2017.6-2.fc25 -> 2017.6-2.fc26
>    p11-kit 0.23.2-4.fc25 -> 0.23.5-3.fc26
>    p11-kit-trust 0.23.2-4.fc25 -> 0.23.5-3.fc26
>    pam 1.3.0-1.fc25 -> 1.3.0-2.fc26
>    passwd 0.79-8.fc24 -> 0.79-9.fc26
>    pcre 8.40-7.fc25 -> 8.40-7.fc26
>    pigz 2.3.4-1.fc25 -> 2.3.4-2.fc26
>    pinentry 0.9.7-2.fc24 -> 0.9.7-3.fc26
>    policycoreutils 2.5-20.fc25 -> 2.6-5.fc26
>    policycoreutils-python 2.5-20.fc25 -> 2.6-5.fc26
>    policycoreutils-python-utils 2.5-20.fc25 -> 2.6-5.fc26
>    policycoreutils-python3 2.5-20.fc25 -> 2.6-5.fc26
>    polkit 0.113-8.fc25 -> 0.113-8.fc26
>    polkit-libs 0.113-8.fc25 -> 0.113-8.fc26
>    polkit-pkla-compat 0.1-7.fc24 -> 0.1-8.fc26
>    popt 1.16-7.fc24 -> 1.16-8.fc26
>    procps-ng 3.3.10-11.fc24 -> 3.3.10-13.fc26
>    protobuf-c 1.2.1-1.fc25 -> 1.2.1-4.fc26
>    psmisc 22.21-8.fc24 -> 22.21-9.fc26
>    publicsuffix-list-dafsa 20170424-1.fc25 -> 20170424-1.fc26
>    python-IPy 0.81-16.fc25 -> 0.81-18.fc26
>    python-IPy-python3 0.81-16.fc25 -> 0.81-18.fc26
>    python-backports 1.0-8.fc25 -> 1.0-9.fc26
>    python-backports-ssl_match_hostname 3.5.0.1-3.fc25 -> 3.5.0.1-4.fc26
>    python-cephfs 1:10.2.4-2.fc25 -> 1:10.2.7-2.fc26
>    python-chardet 2.3.0-1.fc25 -> 2.3.0-3.fc26
>    python-docker-py 1.10.6-1.fc25 -> 1:1.10.6-3.fc26
>    python-ipaddress 1.0.16-3.fc25 -> 1.0.16-4.fc26
>    python-rados 1:10.2.4-2.fc25 -> 1:10.2.7-2.fc26
>    python-rbd 1:10.2.4-2.fc25 -> 1:10.2.7-2.fc26
>    python-websocket-client 0.37.0-2.fc25 -> 0.40.0-1.fc26
>    python2-docker-pycreds 0.2.1-2.fc25 -> 0.2.1-4.fc26
>    python2-pysocks 1.5.6-5.fc25 -> 1.5.7-4.fc26
>    python2-requests 2.10.0-4.fc25 -> 2.13.0-1.fc26
>    python2-setuptools 25.1.1-1.fc25 -> 35.0.1-1.fc26
>    python2-urllib3 1.15.1-3.fc25 -> 1.20-1.fc26
>    python3 3.5.3-6.fc25 -> 3.6.1-6.fc26
>    python3-PyYAML 3.11-13.fc25 -> 3.12-3.fc26
>    python3-chardet 2.3.0-1.fc25 -> 2.3.0-3.fc26
>    python3-configobj 5.0.6-5.fc25 -> 5.0.6-8.fc26
>    python3-crypto 2.6.1-13.fc25 -> 2.6.1-14.fc26
>    python3-dateutil 1:2.6.0-1.fc25 -> 1:2.6.0-3.fc26
>    python3-dbus 1.2.4-2.fc25 -> 1.2.4-6.fc26
>    python3-decorator 4.0.11-1.fc25 -> 4.0.11-2.fc26
>    python3-docker-pycreds 0.2.1-2.fc25 -> 0.2.1-4.fc26
>    python3-gobject-base 3.22.0-1.fc25 -> 3.24.1-1.fc26
>    python3-jinja2 2.8.1-1.fc25 -> 2.9.6-1.fc26
>    python3-jsonpatch 1.2-9.fc25 -> 1.14-3.fc26
>    python3-jsonpointer 1.10-3.fc25 -> 1.10-6.fc26
>    python3-libs 3.5.3-6.fc25 -> 3.6.1-6.fc26
>    python3-libxml2 2.9.4-2.fc25 -> 2.9.4-2.fc26
>    python3-markupsafe 0.23-10.fc25 -> 0.23-13.fc26
>    python3-oauthlib 1.0.3-3.fc25 -> 1.0.3-5.fc26
>    python3-pip 8.1.2-2.fc25 -> 9.0.1-9.fc26
>    python3-prettytable 0.7.2-8.fc25 -> 0.7.2-10.fc26
>    python3-pyserial 3.1.1-1.fc25 -> 3.1.1-3.fc26
>    python3-pysocks 1.5.6-5.fc25 -> 1.5.7-4.fc26
>    python3-requests 2.10.0-4.fc25 -> 2.13.0-1.fc26
>    python3-rpm 4.13.0.1-1.fc25 -> 4.13.0.1-4.fc26
>    python3-setuptools 25.1.1-1.fc25 -> 35.0.1-1.fc26
>    python3-six 1.10.0-3.fc25 -> 1.10.0-8.fc26
>    python3-slip 0.6.4-4.fc25 -> 0.6.4-6.fc26
>    python3-slip-dbus 0.6.4-4.fc25 -> 0.6.4-6.fc26
>    python3-sssdconfig 1.15.2-3.fc25 -> 1.15.2-5.fc26
>    python3-urllib3 1.15.1-3.fc25 -> 1.20-1.fc26
>    python3-websocket-client 0.37.0-2.fc25 -> 0.40.0-1.fc26
>    qrencode-libs 3.4.2-6.fc24 -> 3.4.2-7.fc26
>    quota 1:4.03-7.fc25 -> 1:4.03-8.fc26
>    quota-nls 1:4.03-7.fc25 -> 1:4.03-8.fc26
>    readline 6.3-8.fc24 -> 7.0-5.fc26
>    rootfiles 8.1-19.fc24 -> 8.1-20.fc26
>    rpcbind 0.2.4-6.rc1.fc25 -> 0.2.4-7.rc2.fc26
>    rpm 4.13.0.1-1.fc25 -> 4.13.0.1-4.fc26
>    rpm-build-libs 4.13.0.1-1.fc25 -> 4.13.0.1-4.fc26
>    rpm-libs 4.13.0.1-1.fc25 -> 4.13.0.1-4.fc26
>    rpm-ostree 2017.5-2.fc25 -> 2017.6-3.fc26
>    rpm-plugin-selinux 4.13.0.1-1.fc25 -> 4.13.0.1-4.fc26
>    rsync 3.1.2-3.fc25 -> 3.1.2-4.fc26
>    runc 1:1.0.0-6.git75f8da7.fc25.1 -> 1:1.0.0-7.git6394544.fc26.1
>    screen 4.5.1-2.fc25 -> 4.5.1-2.fc26
>    sed 4.2.2-15.fc24 -> 4.4-1.fc26
>    selinux-policy 3.13.1-225.16.fc25 -> 3.13.1-254.fc26
>    selinux-policy-targeted 3.13.1-225.16.fc25 -> 3.13.1-254.fc26
>    setools-console 3.3.8-12.fc25 -> 4.1.0-3.fc26
>    setup 2.10.4-1.fc25 -> 2.10.5-2.fc26
>    shadow-utils 2:4.2.1-11.fc25 -> 2:4.3.1-3.fc26
>    shared-mime-info 1.8-1.fc25 -> 1.8-2.fc26
>    skopeo 0.1.19-1.dev.git0224d8c.fc25 -> 0.1.20-1.gite802625.fc26
>    skopeo-containers 0.1.19-1.dev.git0224d8c.fc25 -> 0.1.20-1.gite802625.fc26
>    socat 1.7.3.2-1.fc25 -> 1.7.3.2-2.fc26
>    sos 3.4-1.fc25 -> 3.4-1.fc26
>    sqlite-libs 3.14.2-1.fc25 -> 3.19.1-1.fc26
>    sssd-client 1.15.2-3.fc25 -> 1.15.2-5.fc26
>    strace 4.17-1.fc25 -> 4.17-1.fc26
>    sudo 1.8.20p2-1.fc25 -> 1.8.20p2-1.fc26
>    system-python 3.5.3-6.fc25 -> 3.6.1-6.fc26
>    system-python-libs 3.5.3-6.fc25 -> 3.6.1-6.fc26
>    systemd 231-15.fc25 -> 233-3.fc26
>    systemd-bootchart 231-2.fc25 -> 231-3.fc26
>    systemd-container 231-15.fc25 -> 233-3.fc26
>    systemd-libs 231-15.fc25 -> 233-3.fc26
>    systemd-pam 231-15.fc25 -> 233-3.fc26
>    systemd-udev 231-15.fc25 -> 233-3.fc26
>    tar 2:1.29-3.fc25 -> 2:1.29-4.fc26
>    tcp_wrappers 7.6-83.fc25 -> 7.6-85.fc26
>    tcp_wrappers-libs 7.6-83.fc25 -> 7.6-85.fc26
>    tcpdump 14:4.9.0-1.fc25 -> 14:4.9.0-2.fc26
>    teamd 1.26-1.fc25 -> 1.26-2.fc26
>    timedatex 0.4-2.fc24 -> 0.4-3.fc26
>    tmux 2.2-3.fc25 -> 2.3-2.fc26
>    trousers 0.3.13-6.fc24 -> 0.3.13-7.fc26
>    trousers-lib 0.3.13-6.fc24 -> 0.3.13-7.fc26
>    tzdata 2017b-1.fc25 -> 2017b-1.fc26
>    userspace-rcu 0.9.2-2.fc25 -> 0.9.3-2.fc26
>    ustr 1.0.4-21.fc24 -> 1.0.4-22.fc26
>    util-linux 2.28.2-2.fc25 -> 2.29.1-2.fc26
>    vim-minimal 2:8.0.600-1.fc25 -> 2:8.0.600-1.fc26
>    which 2.21-1.fc25 -> 2.21-2.fc26
>    xfsprogs 4.9.0-1.fc25 -> 4.10.0-1.fc26
>    xkeyboard-config 2.20-2.fc25 -> 2.21-1.fc26
>    xz 5.2.2-2.fc24 -> 5.2.3-2.fc26
>    xz-libs 5.2.2-2.fc24 -> 5.2.3-2.fc26
>    yajl 2.1.0-5.fc24 -> 2.1.0-6.fc26
>    zlib 1.2.8-10.fc24 -> 1.2.11-2.fc26
> Removed:
>    libgudev-230-3.fc24.x86_64
>    lz4-1.7.5-1.fc25.x86_64
>    newt-0.52.19-2.fc25.x86_64
>    newt-python3-0.52.19-2.fc25.x86_64
>    pkgconfig-1:0.29.1-1.fc25.x86_64
>    plymouth-0.9.3-0.6.20160620git0e65b86c.fc25.x86_64
>    plymouth-core-libs-0.9.3-0.6.20160620git0e65b86c.fc25.x86_64
>    plymouth-scripts-0.9.3-0.6.20160620git0e65b86c.fc25.x86_64
>    ppp-2.4.7-9.fc24.x86_64
>    python-2.7.13-2.fc25.x86_64
>    python-libs-2.7.13-2.fc25.x86_64
>    python-pip-8.1.2-2.fc25.noarch
>    python-six-1.10.0-3.fc25.noarch
>    python3-docker-py-1.10.6-1.fc25.noarch
Renamed to python3-docker
>    setools-libs-3.3.8-12.fc25.x86_64
>    slang-2.3.0-7.fc25.x86_64
>    sqlite-3.14.2-1.fc25.x86_64
> Added:
>    container-storage-setup-0.3.0-1.fc26.noarch
Replaces docker-storage-setup
>    docker-rhel-push-plugin-2:1.13.1-13.git51eb16e.fc26.x86_64
Added
>    libpkgconf-1.3.7-1.fc26.x86_64
>    lz4-libs-1.7.5-3.fc26.x86_64
>    oci-umount-2:1.13.1-13.git51eb16e.fc26.x86_64
>   
Fixes some leaked mount points,   should be a good addition
>   parted-3.2-24.fc26.x86_64
Part of container-storage-setup, I believe
>    pcre2-10.23-7.fc26.x86_64
>    pkgconf-1.3.7-1.fc26.x86_64
>    pkgconf-m4-1.3.7-1.fc26.noarch
>    pkgconf-pkg-config-1.3.7-1.fc26.x86_64
>    python-enum34-1.0.4-7.fc26.noarch
>    python-rhsm-certificates-1.19.4-1.fc26.x86_64
>    python2-2.7.13-10.fc26.x86_64
>    python2-appdirs-1.4.0-10.fc26.noarch
>    python2-cffi-1.9.1-2.fc26.x86_64
>    python2-cryptography-1.7.2-1.fc26.x86_64
>    python2-idna-2.5-1.fc26.noarch
>    python2-libs-2.7.13-10.fc26.x86_64
>    python2-packaging-16.8-4.fc26.noarch
>    python2-pip-9.0.1-9.fc26.noarch
>    python2-ply-3.9-3.fc26.noarch
>    python2-pyOpenSSL-16.2.0-4.fc26.noarch
>    python2-pyasn1-0.2.3-1.fc26.noarch
>    python2-pycparser-2.14-10.fc26.noarch
>    python2-pyparsing-2.1.10-3.fc26.noarch
>    python2-six-1.10.0-8.fc26.noarch
>    python3-appdirs-1.4.0-10.fc26.noarch
>    python3-cffi-1.9.1-2.fc26.x86_64
>    python3-cryptography-1.7.2-1.fc26.x86_64
>    python3-docker-2.1.0-1.fc26.noarch
Renamed python3-docker-py
>    python3-idna-2.5-1.fc26.noarch
>    python3-packaging-16.8-4.fc26.noarch
>    python3-ply-3.9-3.fc26.noarch
>    python3-pyOpenSSL-16.2.0-4.fc26.noarch
>    python3-pyasn1-0.2.3-1.fc26.noarch
>    python3-pycparser-2.14-10.fc26.noarch
>    python3-pyparsing-2.1.10-3.fc26.noarch
>    setools-python-4.1.0-3.fc26.x86_64
>    setools-python3-4.1.0-3.fc26.x86_64
Not sure what is pulling in setools, must be policycoreutils?
> ```